A toilet is one of the most frequently used facilities at home, so even the highest quality models are prone to suffer wear and tear after a while. You can fix some toilet problems on your own, but others require the attention of a professional, so it’s important to make that distinction.

AquaSource toilets are known to be efficient, good quality, and offered at reasonable prices, but they aren’t free of problems. Therefore, you should stay vigilant to catch these common issues and correct them before they escalate.

Common AquaSource toilet problems include clogging, issues with cleaning, and the toilet not flushing.

Let’s explore this topic further to help you understand your AquaSource toilet better.

Are Aquasource Toilets Still Made?

Aqusource toilets wereactually discontinued. However in place of aquasource they sell Project source pro flush toilets instead. The performance is actually the same so we highly recommend them.

Is Aquasource A Good Brand?

AquaSource is a good discount brand known for being reliable. Nonetheless, AquaSource toilets have their share of problems.

Aquasource Toilet Problems

Toilet Not Flushing

The water level of your AquaSource toilet determines how well it flushes, so it’s essential to keep the levels at an optimum. It shouldn’t be a big deal if the water levels fall slightly lower than the line marked in the toilet tank, but if the variation is sizeable, you will need to make some adjustments.

A low water level in the toilet tank means less water flows into the bowl, which can cause clogging or make cleaning your toilet problematic. On the other hand, a high water level may cause the toilet not to flush entirely, rendering your toilet inefficient and leading to water wastage.

Toilet Not Filling with Water

Adjusting the water levels in an AquaSource toilet is a pretty straightforward process. Here’s what to do:

Use the valve to switch off the water, stopping it from flowing into the toilet tank.
Drain the tank by flushing the toilet to access the flush mechanism.
Locate the fill float (you should find a clip attached to the flush mechanism’s metal rod piece)

Release the clip by pressing it down manually.
Lower or raise the water level by sliding the fill valve down or up.
Once you adjust the water level, attach the float at the right level by releasing the slurping clip.

Turn on the valve and let the toilet tank fill up. Monitor the water level
Flush the toilet a couple of times to ensure the new water level is accurate.

Inspect The Toilet’s Parts

If, even after re-adjusting the water level in the tank, the problem persists, check the toilet’s float mechanism for damage or buildup. If the bottom rubber flapper is damaged or cracked, it can make the tank leak into the toilet bowl as time goes by, leaving behind less water in the tank for flushing.

The flapper may also stop sealing properly because of other buildups.

In addition, check the chain found between the other mechanism and the flush lever to make sure it has sufficient slack. If the chain is damaged or detached, the flush will not work correctly, and you will require a new flush mechanism.

You can effortlessly find AquaSource toilet parts from Lowe’s store and other home improvement stores.

Aquasource Toilet Clogging

A partial clog or full clog will prevent water from flowing correctly out of your AquaSource toilet down the drain. Some of the things that can clog your toilet include toys, paper towels, wipes, sanitary pads, and other non-biodegradable items.

To avoid making your toilet clog, don’t flush anything that’s not tissue paper or solid waste, even if it’s marked flushable. Such items are better off in your trash cans.

Should your AquaSource toilet gets clogged, unclog it with or without a plunger.

Unclogging An AquaSource Toilet With A Plunger

With different types of plungers available, picking the right one to unclog your toilet can be challenging. The best plunger for a toilet is the flange plunger.

Also, get rubber gloves and water to fill your toilet bowl if necessary. Once you collect everything you need, do the following:

The toilet bowl needs to have water to ensure the plunger’s head is submerged. Pour water into the bowl if necessary.
Wear your rubber gloves, then make sure the toilet plunger’s flange is entirely pulled from the cup. Put the plunger on the bowl at an angle to let the water fill up with water. Lowering it straight down the bowl makes the cup trap air, reducing the plunging force.

Hold the plunger with both hands and push it down forcefully and pull it back up without breaking the seal of the cup around the hole. Make the push-pull motion about six times, then pull the cup from the hole after the final thrust.
Stop the plunging motions once the bowl is emptied.
Flush your toilet. If the water flows normally, the problem is fixed.

Unclogging An AquaSource Toilet Without A Plunger

You can still unclog your AquaSource toilet without a plunger with various methods using common household items. Here’s what you need to do:

Stop Water Overflow

If the water is overflowing from the bowl, you will need to stop it. Remove the tank lid, then close the flapper found at the tank’s bottom by unhooking the chain joining the flapper to the handle arm.

Doing so keeps the flapper flap, preventing more water from flowing into the bowl. Reattach the toilet chain once the water level has receded, and don’t repeatedly flush until you have removed the clog.

Remove The Water

You will need to manually remove the water if it’s not draining from the toilet bowl. You can achieve that using a disposable container which you will use to transfer the water in the bowl to an empty bucket next to your toilet.

Make sure you wear rubber gloves before emptying the bowl.

Try Unclogging With Hot Water

This is the first and easiest method you should attempt when trying to unclog your toilet without using a plunger. The hot water may help loosen and dislodge the clog.

Fill a bucket with hot water, then pour it into your toilet bowl. Avoid using boiling water because the heat might crack your toilet.

Add Dish Soap

If your AquaSource toilet continues to drain slowly even after pouring hot water, try dish soap. Pour a generous amount of liquid soap into a toilet bowl partially filled with water, add hot water, and let the soap’s grease-cutting properties dissolve the solids blocking your toilet.

Poke The Blockage

If you can see the item blocking your toilet at the bottom of the bowl, try poking it with a wire hanger to dislodge or break up the clogged area. Be careful not to scratch the porcelain while doing this to avoid destroying your toilet.

You can also do the same with a toilet brush. Wrap the brush bristles using a plastic sack, then secure the handle of the brush using a rubber band.

Insert the bristles into the blocked toilet drain, then get rid of the clog through up-and-down motions.

Use The Force Of Water

You can also force out a clog using water in a plastic bottle. However, before doing so, keep your hands clean with rubber gloves, avoid splashback from going into your eyes by wearing goggles, and put on a face mask.

Fill a two-liter bottle with warm water, then use your gloved thumb to cover the opening of the bottle. Position the bottle at an inverted angle in the mouth’s drain at the toilet bowl’s bottom.

Take out your thumb from the opening of the bottle, then squeeze the bottle with using both hands to force the water into the drain, dislodging the clog.

Try Baking Soda And Vinegar

This is another home remedy you can use to unclog your AquaSource toilet. Add a cup of baking soda into a toilet bowl with about half-full water to sit, then pour vinegar into it slowly to form a chemical reaction.

Let the mixture sit for a while and wait if the water level goes down, indicating that the clog has been cleared. The reaction from this method produces fizz.

Unclog Using Drain Cleaning Products

Try drain cleaning products if household mixtures fail to act on and remove the clogs. However, pick what to use carefully, avoiding corrosive items to protect your drains.

It’s not smart to unclog your toilet by pouring bleach down the drain because this chemical can react with other things in the pipes, creating toxic fumes or damaging the plumbing system. Therefore, avoid doing so to protect your pipes.

Final Remarks

AquaSource toilet problems can make you panic, but you can solve these issues and have a fully functioning toilet in no time. The brand has a solid reputation for providing its customers with high-quality products, but like any other thing, they are susceptible to wear and tear.