Which is the recommended open ended toilet paper holder direction? Like any other toilet paper holder, it’s vital to know which direction to install an open-ended one. This post will provide this information and more, so keep reading.
Nobody enjoys swapping empty toilet rolls with new ones .However, the moment you use the toilet only to find the roll empty, you’ll know the importance of ensuring you always have toilet paper in the holder.
Thankfully open-ended toilet paper holders make swapping out a depleted toilet roll with a new one easy. Moreover, they provide sufficient space for big rolls because their arms can swing outwards to provide more space between the wall and the holder.
Open Ended Toilet Paper Holder Direction
Toilet paper holders, also called toilet paper dispensers, are essential bathroom accessories designed to keep toilet paper within your reach and dispense easily. They come in different styles and types, including open-ended/ Euro/European toilet paper holders.
When installing an open-ended toilet paper holder, you will need to think about the way you typically pull the toilet paper as it will inform the appropriate direction your holder should face. For that reason, the open end of your toilet roll holder should face the opposite of your usual pull direction to keep the roll from falling.
Most people usually prefer the holder to face them when seated because it looks more natural to your eye. However, there is nothing against turning it away from you should you choose to do so.
When it comes to which side of the toilet to put it, the simple answer is it’s entirely up to you. You can mount it on the left or right side but make sure you can comfortably reach it from a sitting position.
Therefore, it should be 8-12 inches in front of your toilet bowl and 26 inches above the toilet floor. Moreover, you need to leave some room between you and the holder and don’t put it under a towel rack to protect it from getting wet.
Read Also Where to put towel bar in small bathroom
How Do You Install An Open-Ended Toilet Paper Holder?
You don’t need to hire someone to install a toilet paper holder for you. It’s an easy, manageable DIY project that won’t take much of your time.
Before walking you through the steps, here are the materials and tools you will need
Tools
- Level
- Screwdriver
- Hammer
- Electronic Stud Finder
- Drill & Bits
Materials
- Wall Anchors
- An Open-Ended Toilet Paper holder
The Installation Process
Below are the basic steps you need to take to install an open-ended toilet paper holder. However, remember the directions may vary slightly based on the holder you get.
- Decide On The Mounting Spot
You will need to choose whether to attach your open-ended toilet paper holder on the right or left wall. Once you do so, measure where to put it, ensuring you can easily access it.
The ideal spot for a toilet paper holder from the floor is 26 inches because it will keep it from dragging on your toilet floor and is easy to reach.
Additionally, the distance from the bowl should be 8 to 12 inches. For shorter users like kids, use 8-9 inches and 10-12 inches for taller users.
- Mark The Locations Of The Bracket
A level will help make sure the bracket of the open-ended toilet paper holder is straight. If your holder has a template, so use painter’s tape to tape to the bathroom wall, then adjust based on the level.
However, if the toilet paper holder does not have a template, draw a straight line equal to your holder’s length. Hold the bracket completely level with the line, then mark the spot where you’ll drill the bracket with a pencil.
Read also unique towel rack ideas
- Drill The Mounting Holes
You won’t need anchors to drill mounting holes into a stud or solid wood, but find the stud using an electronic stud finder before drilling. You will need to make a 1 1/16-inch hole.
On the other hand, you will need anchors to drill directly into ceramic tile or drywall, so put anchors into the hole with a hammer and make sure they are level with the wall. Create a 3/16-inch hole.
If your wall is tiled, tape over it before drilling to stop it from breaking. The process is similar to drilling into drywall but do it with a carbide drill bit.
- Install The Brackets
Place the bracket over the drilled holes, ensuring the holes in the bracket align with those on the wall, then secure it using the provided fasteners. Make sure they are level, facing outward, and the arrow on the bracket pointing up.
Once your open-ended toilet paper holder is securely in place, put in a toilet paper roll and start using it at your pleasure.
Read Also Kohler almond vs Biscuit which one is darker?
The Best Open-Ended Toilet Paper Holders
If you are in the market for a high-quality open-ended toilet paper holder, here are some excellent options.
1. KES Toilet Paper Holder SUS304 Stainless Steel Wall Mount Brushed
This is a heavy-duty, sturdy open-ended toilet paper holder designed to hold up to a 4.92-inch paper roll. It is also made of high-quality stainless steel, making it resistant to rust and corrosion, thus suitable for humid areas such as kitchens and bathrooms.
Moreover, it doesn’t rotate or wobble because of its unique slot design and screw tightening. It’s also easy to install, and you can install it horizontally or vertically.
You have multiple colors to choose from-brushed grey, brushed brass, polished silver, matte black and brushed brass, and matte black.
2. YIGII Adhesive Toilet Paper Holder
This is wall-mounted, stainless steel, brushed open-ended toilet paper holder suitable for RVs, bedrooms, and bathrooms. Its ending bends slightly upward to protect your toilet roll from falling.
You don’t have to drill into your wall to install it because it’s designed with an adhesive back that sticks to the mounting surface. However, don’t attach it to a painted wall or wallpaper.
3. Nolimas Brushed Nickel Toilet Paper Holder
This stain-proof, anti-fingerprint, no fade open-ended toilet paper holder provides an excellent solution for modern styles in kitchens, bathrooms, toilets, and bedrooms. Additionally, it’s durable, reliable, rustproof, and easy to install.
Since its screws are concealed, this toilet paper holder will do well in the kitchen or bathroom. Moreover, the toilet paper roll won’t fall because of the tail end’s bigger round hook.
Read also Glacier bay toilet reviews
Conclusion
While there are multiple designs for toilet paper holders, open-ended ones offer certain advantages you don’t get from others. They let you swap toilet rolls effortlessly through the tail end.
Besides functionality, pick an open-ended toilet paper holder that complements your preference and the aesthetics of the room. This is possible since these holders come in different colors, styles, and designs.